Vigor 2926 LTE Series is a dual-WAN security router with built-in 3G/4G/LTE modem. There are two Gigabit Ethernet WAN for all kinds of Internet access, and a SIM card slot which allows adding cellular connectivity by simply inserting a SIM card. There is also a USB port for additional 3G/4G/LTE modem, and up to 4 Internet access can be active simultaneously. Vigor 2926 Series provides not only high network availability, but also comprehensive firewall and content security management (CSM) features to protect the local network, and it can be a VPN gateway for up to 50 simultaneous VPN connections, to allow secure connections over the Internet.

• 2 Ethernet WAN for load balancing or failover
• Built-in 3G/4G/LTE cellular connectivity
• Built-in 802.11ac Wave 2 dual-band Wi-Fi
• 1 USB port for 3G/4G modem or extra storage
• 50 simultaneous VPN tunnels
• SPI firewall with content filtering by url keyword, category, and apps

• Built-in LTE & cellular connectivity
  Vigor 2926 LTE Series has built-in an LTE modem that accepts the standard size SIM cards. With just a SIM card, you may add a wireless Internet connectivity to share the traffic load or backup the primary link. The LTE WAN supports download speed up to 150 Mbps, upload speed up to 50 Mbps, and it works with worldwide cellular networks including 4G and 3G, and can automatically fall back to 3G when 4G is not available. While using the data services of the SIM cards, the SMS service is also supported. Receiving and sending SMS messages can be done from the router's web user interface, you may also configure the router to send notifications via SMS, moreover, commands can be sent to the router via SMS to initiate a router reboot or status report.
• WAN load balancing & failover
  Vigor 2926 LTE Series has two Gigabit Ethernet WAN ports that can be used for any types of connection, 3G/4G/LTE USB modem can also be attached to the USB ports of the router, and offer wireless Internet connectivity in case the fixed lines are not available. All of the WAN interfaces can be configured to operate in either Load Balancing mode, which will be active all the time, or in Failover mode, which will be active only when detecting connection loss or heavy load on the primary connection. On Vigor 2926 Series, Load Balancing can be either IP-based mode, which will distribute the packets destined to different IP address across different WANs, or Session-based mode, which allows the packets of different sessions to take different paths, which means a multiple-session connection can be established across multiple WANs, and use multiple WAN's bandwidth at the same time. Policy-based Load Balancing is also supported so that you may specify the path for certain packets.
• Flexible LAN management
  The 4-port Gigabit Ethernet switch on the LAN side provides high-speed connectivity for the servers and PCs on the local network, and the Virtual LAN (VLAN) feature allows you to separate the LAN clients into different logical domains thus to increase the security and network efficiency. Vigor 2926 LTE Series supports 802.1Q standard and can build a tag-based VLAN system with an 802.1Q-support switch, port-based VLAN is also supported that each LAN port can be configured as a member of different VLAN and be isolated from each other without the use of VLAN tag. Moreover, up to 6 IP subnet can be set up on Vigor 2926 LTE Series, so each VLAN can use different IP addressing space. Vigor 2926 LTE Series has implemented an integrated solution to work as a public Wi-Fi hotspot. While providing Internet access to the guests, the hotspot web portal can be used to collect the guests' information, informing the terms and conditions, and presenting a landing page to them.
• Firewall & security
  Vigor 2926 LTE Series supports Stateful Packet Inspection (SPI) firewall and flexible filtering rules, it can accept or deny packets based on the information in the packet header (such as source IP, destination IP, protocol, and port number) or the packet's application.

Main Specifications

Product Description	Draytek Vigor 2926Lac - wireless router - WWAN - 802.11a/b/g/n/ac Wave 2 - desktop
Features	DMZ port, IGMP snooping, Syslog support, DoS attack prevention, content filtering, DiffServ support, print server, MAC address filtering, IPv6 support, VPN passthrough, Wireless Distribution System (WDS) support, URL filtering, Outbound Load Balancing, firmware upgradable, DDos attack prevention, Wi-Fi Multimedia (WMM) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (QoS), dual WAN connection, Dead Peer Detection (DPD), IPSec NAT-Traversal (NAT-T), RADIUS support, Wi-Fi Protected Setup (WPS), DHCP server, Samba support, Multiple SSID support, SMS alert, hidden SSID, DNS proxy, Bandwidth-On-Demand (BOD), reset button, IPv4 support, DHCP relay, Stateful Packet Inspection Firewall (SPIF), 3G/4G USB Dongle Support, DHCP client, tagged VLAN, IM/P2P filter, DNS caching, Content Security Management (CSM), Type of Service (ToS), DiffServ Code Point (DSCP) support
Dimensions (WxDxH)	24.1 cm x 16.5 cm x 4.4 cm
Device Type	Wireless router - wireless cellular modem - 4-port switch (integrated)
Enclosure Type	Desktop
Compliant Standards	IEEE 802.1Q, IEEE 802.1p, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, IEEE 802.11n, UPnP, IEEE 802.11ac Wave 2
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2
Capacity	VPN tunnels: 50 UPnP sessions: 50 VPN tunnels: 50 SSL VPN tunnels: 25
Network / Transport Protocol	PPTP, L2TP, NTP, IPSec, PPPoE, DNS, DHCPv6
Remote Management Protocol	SNMP 2, Telnet, SNMP 3, HTTP, HTTPS, SSH, CLI, TR-069, TR-104
Routing Protocol	RIP-2, static IP routing
Frequency Band	2.4 GHz / 5 GHz
Cellular Protocol	LTE
WAN Ports Qty	2

Extended Specifications