NETGEAR continues to lead the networking industry with its 2nd Generation of ProSAFE 10-Gigabit Web Managed (Plus) Switches, the XS708Ev2 8-Port model, the market's most cost-efficient 10-Gigabit switches. Built for SMBs, workgroups, and even home offices, the XS708Ev2 provides 10-Gigabit Copper ports and SFP+ fiber ports, all at an affordable price.
The XS708Ev2 is purposely designed as a cost-effective way to provide 10G connections to 10G-capable servers and NAS (Network Attached Storage) systems. As part of the ProSAFE Web Managed (Plus) switch product family, the XS708Ev2 comes with configurable L2 network features such as VLAN, QoS, IGMP snooping, port trunking and rate limiting. These features help to further optimize business network performance, delivering great value and empowering the SMB network.
The XS708Ev2 provides 8 (eight) 10-Gigabit Copper ports and 1 Shared (Combo) Copper/SFP+ fiber port at an affordable price. The XS708Ev2 can be used at the "center of a small business or home office network" or as an aggregation/access switch in a larger organization including workgroup access, connecting to a NETGEAR ProSAFE 10-Gigabit Fully Managed Switch on one end and extending the 10G connections to the edge. The NETGEAR 10-Gigabit Web Managed (Plus) switches are also ideal for smaller workgroups that need high bandwidth for sharing, collaborating, editing, and publishing high-density content like video or animation.

• 2MB packet buffer memory
• 160 Gbps non-blocking fabric
• 8 Priority queues
• Weighted Round Robin (WRR) priority queuing
• 16K Media Access Control (MAC) addresses with 48-bit MAC address
• 128 Multicast groups
• 128 VLANs
• 119.0 Mfps packet forwarding rate
• Jumbo frames up to 9K packet size supported

• 10GBASE-T connections
  Support low-latency, line-rate 10G Copper "BASE-T" technology with backward compatibility to Gigabit Ethernet and Fast Ethernet. Cost-effectively migrate current network to 10G capacity by utilizing the existing Cat 6 RJ45 short connections (up to 45 m) and Cat 6a/Cat 7 connections up to 100 m.
• 10GBASE-X SFP+ ports
  Providing flexibility to uplink to 10G-capable core or aggregation switches that support fiber links. Backward compatible to Gigabit fiber. Support copper or fiber modules.

Main Specifications

Product Description	NETGEAR Plus XS708Ev2 - switch - 8 ports - Managed - rack-mountable
Manufacturer Warranty	ProSAFE lifetime warranty
Features	DHCP support, VLAN support, IGMP snooping, DoS attack prevention, port mirroring, store and forward, Broadcast Storm Control, full duplex mode, Multicast Storm Control, Unicast Storm Control, firmware upgradable, Quality of Service (QoS), reset button, DHCP client, Energy Efficient Ethernet, 2MB packet buffer, loop prevention, security lock slot (cable lock sold separately), Type of Service (ToS), DiffServ Code Point (DSCP) support, 2 fans, cable test, administrator's password, Link Aggregation, Weighted Round Robin (WRR)
Dimensions (WxDxH)	44 cm x 20.4 cm x 4.3 cm
Weight	2.8 kg
Power	AC 120/230 V (50/60 Hz)
Localisation	Australia, Asia Pacific
Device Type	Switch - 8 ports - Managed
Enclosure Type	Rack-mountable 1U
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3aq, IEEE 802.3az
Capacity	VLANs supported: 128 IGMP multicast groups: 128 LAG groups: 4 Priority queues: 8
Remote Management Protocol	HTTP, TFTP
Routing Protocol	IGMPv2, IGMP, IGMPv3
Performance	Switching fabric bandwidth: 160 Gbps Forwarding performance (64-byte packet size): 119 Mfps
MAC Address Table Size	16K entries
Ports	8 x 10 Gigabit Ethernet + 1 x combo 10 Gigabit SFP+
Jumbo Frame Support	9KB
Subtype	10 Gigabit Ethernet

Extended Specifications

Warranty