Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit, the switch gives the exact speed required, with no downgrade. Also, the NETGEAR Multi-Gigabit switch ports can connect regular CAT5e Ethernet cables, without the need to upgrade to CAT6 wiring, therefore reducing wiring costs and hassle. Access, aggregation or collapsed core: you can now have your PCs, printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet devices on the same switch, all line-rate. 10G copper and fiber ports are ready for local servers and storage, or high-speed aggregation to your network core.

• Multi-Gigabit, multi-speed ports to connect any type of device to a single switch
• Quiet desktop operation or rack mounting
• Layer 3 static routing with 32 routes for interVLAN local routing
• Advanced VLAN support for better network segmentation
• Advanced QoS for traffic prioritization including port-based, 802.1p and L2/L3/L4 DSCP-based
• Auto "denial-of-service" (DoS) prevention
• IGMP Snooping and Querier for multicast optimization
• Rate limiting and priority queuing for better bandwidth allocation
• Port mirroring for network monitoring
• Energy Efficient Ethernet (IEEE 802.3az) for maximum power savings
• Easy-to-use web browser-based management GUI
• SNMP v1, v2c, v3 and RMON remote monitoring
• Standards-based technology ensures interoperability with any standards-based devices in the existing network
• Dual firmware images improve reliability and uptime to your network

Main Specifications

Product Description	NETGEAR MS510TX - switch - 8 ports - smart - rack-mountable
Manufacturer Warranty	ProSAFE lifetime warranty
Features	IGMP snooping, Syslog support, DoS attack prevention, port mirroring, DiffServ support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Dynamic ARP Inspection (DAI), LACP support, LLDP support, Energy Efficient Ethernet, Class of Service (CoS), 802.1x authentication, Type of Service (ToS), DiffServ Code Point (DSCP) support, 1.5MB packet buffer, MAC and IP-based ACLs support, 1 fan, Voice VLAN, VLAN management, Guest VLAN, Weighted Round Robin (WRR), Auto VoIP, MAC lockdown, IPv6 management
Dimensions (WxDxH)	32.8 cm x 16.9 cm x 4.3 cm
Weight	1.42 kg
Localisation	Australia, Asia Pacific
Device Type	Switch - 8 ports - L3 Lite - smart
Enclosure Type	Rack-mountable
Compliant Standards	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3an, IEEE 802.3az, ITU-T H.323, IEEE 802.3bz
Capacity	LAG groups: 8 MAC addresses: 16000 ACL entries (ingress): 164 Virtual interfaces (VLANs): 256 RP/NDP table: 512 IPv4 routes (static): 32 IPv6 routes (static): 32 IGMP multicast groups: 512 ARP entries: 512 VLAN routing interfaces: 32 Jumbo frame size: 10000 DHCP snooping entries: 1000 Multicast groups: 512 Priority queues: 8
Remote Management Protocol	SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c, TFTP
Routing Protocol	Static IP routing
Performance	Bandwidth: 78 Gbps Latency (10 Gbps): <2.36µs Latency (SFP+): <2.6µs Packet forwarding rate: 58 Mpps
MAC Address Table Size	16K entries
Ports	4 x 10/100/1000 + 2 x 100/1000/2.5G/5G + 2 x 100/1000/2.5G
Subtype	10 Gigabit Ethernet

Extended Specifications

Warranty