Paradigm PCs will remain open to supply 'essential' businesses and those working from home throughout the Covid-19 alert level 4 period. We are following strict health guidelines set out by the Ministry of Health and are closely monitoring the evolving situation as it unfolds.

NETGEAR M4200 Intelligent Edge Series GSM4210P - Switch - L3 - Managed - 6 x 100/1000/2.5G(PoE+) + 2 x 100/1000/2.5G/5G(PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+ - rack-mountable - PoE+(240 W)


  • Product Status: Out Of Stock
  • PP ID Code:AA71152
  • Manufacturer Part No:
    GSM4210P-100AJS
  • Warranty:Lifetime

$1,961.75

inc GST & Free Delivery

ADD TO CART

Description

The NETGEAR ProSAFE M4200-10MG-PoE+ Managed Switch was designed from the ground up to optimize the installation of Wave 2 11ac access points. Includes eight full power PoE+ and multi-speed 1G, 2.5G ports for 100 meter cable runs, combined with two 10G uplinks for a fully non-blocking deployment of eight Wave 2 11ac access points .NETGEAR Multigigabit Ethernet is compatible with most major wireless and switching vendors managed solutions, and the only one with 8 x 2.5G to the AP and 2 x 10G line-rate aggregation to the wiring closet.

  • Provide eight full power PoE+ and multi-speed 1G, 2.5G ports combined with two 10G SFP+ uplinks
  • Allow for a fully non-blocking deployment of eight Wave 2 11ac access points, with 240 W PoE budget
  • 8 x 2.5G to the access points and 2 x 10G line-rate aggregation to the wiring closet

Main Specifications

Product Description NETGEAR M4200 Intelligent Edge Series GSM4210P - switch - 10 ports - Managed - rack-mountable
Manufacturer Warranty NETGEAR lifetime warranty
Features DHCP support, VLAN support, IGMP snooping, Rapid Spanning Tree Protocol (RSTP) support, MLD snooping, side to side airflow, 16MB packet buffer
Power AC 120/230 V
Localisation Asia Pacific
Device Type Switch - 10 ports - L3 - Managed
Enclosure Type Rack-mountable 1U
Compliant Standards IEEE 802.3ad (LACP), IEEE 802.1AX
Remote Management Protocol SNMP, RMON, Telnet, HTTPS, SSH, CLI
Routing Protocol RIP, static IPv4 routing, static IPv6 routing, MLD
Performance Switching capacity: 90 Gbps
Throughput: 66.9 Mpps
Power Over Ethernet (PoE) PoE+
MAC Address Table Size 16K entries
Ports 6 x 100/1000/2.5G (PoE+) + 2 x 100/1000/2.5G/5G (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+
PoE Budget 240 W
Subtype 10 Gigabit Ethernet

  • Extended Specifications

  • Expansion / Connectivity
    Interfaces 1 x management (Gigabit LAN) RJ-45
    1 x serial (console) RJ-45
    1 x console (mini-USB)
    1 x USB
    6 x 1/2.5G (PoE+) RJ-45
    2 x 1/2.5G/5G (PoE+) RJ-45
    2 x 10GBase-X SFP+
    1 x USB Type A
    General
    Device Type Switch - 10 ports - L3 - Managed
    Enclosure Type Rack-mountable 1U
    Subtype 10 Gigabit Ethernet
    Ports 6 x 100/1000/2.5G (PoE+) + 2 x 100/1000/2.5G/5G (PoE+) + 2 x 1 Gigabit / 10 Gigabit SFP+
    Power Over Ethernet (PoE) PoE+
    PoE Budget 240 W
    Performance Switching capacity: 90 Gbps
    Throughput: 66.9 Mpps
    MAC Address Table Size 16K entries
    Routing Protocol RIP, static IPv4 routing, static IPv6 routing, MLD
    Remote Management Protocol SNMP, RMON, Telnet, HTTPS, SSH, CLI
    Authentication Method Secure Shell (SSH), RADIUS, TACACS+
    Features DHCP support, VLAN support, IGMP snooping, Rapid Spanning Tree Protocol (RSTP) support, MLD snooping, side to side airflow, 16MB packet buffer
    Compliant Standards IEEE 802.3ad (LACP), IEEE 802.1AX
    Processor : 800 MHz
    RAM 1 GB
    Flash Memory 256 MB
    Miscellaneous
    Rack Mounting Kit Included
    Localisation Asia Pacific
    Power
    Power Device Internal power supply
    Voltage Required AC 120/230 V
    Power Consumption Operational 286.1 Watt
    Software / System Requirements
    Software Included Drivers & Utilities

  • Warranty
  • Manufacturer WarrantyService & Support NETGEAR lifetime warranty